Video: CycloWiz Wii Mod Installation!

[Zeus]

And here it is! A video which shows all that is required to install the highly anticipated CycloWiz mod for the Wii. It should be a 'walk in the park' for most, but as always be patient to reduce any risks of a bad install!

<center><object width="235" height="200"><param name="movie" value="http://www.youtube.com/v/H4eDbn4ysSM"></param><embed src="http://www.youtube.com/v/H4eDbn4ysSM" type="application/x-shockwave-flash" width="235" height="200"></embed></object></center></a>

[ASSPOP]

lol it would have been cool if you would be wearing the Michael Jackson gloves. :D lol


Edit: Im gonna try to do a wire mod with this. So i need to prepare. :o

[s00pcan]

Looks easy. I'd buy it if I had a wii.

[ds_barf]

Cool :)

Isn't that tape static? Static stuff always kills chips right? :eek:

[mickcris]

electrical tape

[cubenoob]

lol it would have been cool if you would be wearing the Michael Jackson gloves. :D lol


Edit: Im gonna try to do a wire mod with this. So i need to prepare. :o
lol @ the Michael Jackson part

[enlightx]

they should sooo tell people to remove the ribbon cable on the left 1 wrong move with the iron and throw the wii away untill replacements are available

i think personally ill wire mine in i remeber the hassel i had with xecuter 1 chip when i wanted to upgrade it was a pain gettin it out and that was using desolider braid !

any 1 know were u can preorder in the UK ?

[furyoo]

they should sooo tell people to remove the ribbon cable on the left 1 wrong move with the iron and throw the wii away untill replacements are available

i think personally ill wire mine in i remeber the hassel i had with xecuter 1 chip when i wanted to upgrade it was a pain gettin it out and that was using desolider braid !

any 1 know were u can preorder in the UK ?
One wrong move with a soldering iron can cause a whole plethora of defects, so no worries there. If you're not skilled with the iron you shouldn't be doing this IMO.

[11111]

One wrong move with a soldering iron can cause a whole plethora of defects, so no worries there. If you're not skilled with the iron you shouldn't be doing this IMO.

true dat, i'm gettin my friend to do this fo' sho. but enlightx does have a good point tho on the ribbon.

[Z80]

But the big question is if you will ever have to remove your modchip, or if these chips will last the lifetime of the system. I would think that any actions to stop modding would be in future versions of hardware needing new chips, and that no software will ever stop your modding. I think though in the end it is best to solder wires than to quick solder, despite the convience loss. I was surprised to hear this chip is virtually the same price if not alittle less.

[snafro]

anyone knows where to get an install tut with wires ? dont want to mess up my console

[evlspcmk]

yea i was thinking of getting this and just ading wires, incase i do want to get rid of it

[Guardian_]

anyone knows where to get an install tut with wires ? dont want to mess up my console

Iam also interested in an tutoriol for an wired installation.
Thank you! :)

[jumi]

Iam also interested in an tutoriol for an wired installation.
Thank you! :)

Wiinja is better... wiinja has wires installation...

[Perkele]

anyone knows where to get an install tut with wires ? dont want to mess up my console
Just solder wires between the points on the CycloWiz and the corresponding points on the WiiDrive where you otherwise solder these points directly.
If you can't figure that out, don't solder your Wii.

Wiinja is better... wiinja has wires installation...
The CycloWiz has both wireless and wire installation.

l'm not saying CycloWiz is the best one, but the reputation of Team Ninja should tell enough about their chip/code.

[snafro]

Just solder wires between the points on the CycloWiz and the corresponding points on the WiiDrive where you otherwise solder these points directly.
If you can't figure that out, don't solder your Wii.



yeah i thought so too... but these points look very very small, if we're talking about the same little golden contact next to the quicksolder holes

[idunder]

Now that I see the board installed with quick solder method, I am not going to even bother with wires. I will use the quick solder method.

After I see this, the solder can be removed if ever needed pretty easy with the most basic desoldering iron. (bulb)

And if there is ever a replacement for anything on the Wii (drive bios, or something else) it can just be disabled with no need to remove it.

[momomomo]

..........

[mozzer999]

can any1 just make a game loader ?! cause openning the wii may cause damages to it

Sure email me, and I will send you a game loader that plays all region games (Wii and GC), allows locked content of new wii sports games (pissin up a toilet wall, the pogo stick, mud wrestling etc), and it also gives you free blow jobs when your mum has nipped out to see your auntie.

Can't say fairer than that, and no need to open your console!

[davvy76]

Sure email me, and I will send you a game loader that plays all region games (Wii and GC), allows locked content of new wii sports games (pissin up a toilet wall, the pogo stick, mud wrestling etc), and it also gives you free blow jobs when your mum has nipped out to see your auntie.

Can't say fairer than that, and no need to open your console!

How much will this cost? Sounds very interesting, but in bj mode will it morph into whatever pops into your head, say for instance the crazy frog :o

[momomomo]

..........

[Xenogears V]

It seems really simple!.

[Ghostfacekillah]

what i mean ***** that just make wii apps better than this chips you can make a .bin apps

Ever heard of signed/unsigned Drivers/Vista/DRM ?
Why dont u code Appz for the WII ? Learn C and hardware architecture
if not..shut the f**k up with your hillarious comments...

[AceMilo]

There are solder pads on the chip to do a wire install.

[high-as-a-kite]

Compared to wiikey they both pretty much sux :D but lets wait a few days to see more about wiikey

More like, compared to the details that have released about the wiikey... you're right about the whole waiting thing though.